Multilayer anaerobic oven
Yihexing multi-layer anaerobic oven adopts long-axis high-temperature high-power axial flow fan, stainless steel turbo fan blade, combined with unique design air duct, intelligent PID thermostat combined with SSR solid state relay to control high-efficiency stainless steel heater heating, forming a uniform temperature The high temperature hot air heats the inside of the box to ensure that the inside of the anaerobic oven reaches the ideal temperature environment.
1. Adopt Japan 3Ling PLC plus 7-inch color touch screen human-machine interface, 2 control modes of fixed value\/program (programmed control 100 segments), with sensor disconnection alarm function, with over-temperature alarm protection function, to ensure the safe operation of the product.
2. One-way horizontal air transport is adopted in the box, strong pressure air is supplied in the 2-side air duct, and high-density punched air panels are used on the 2 sides of the air duct to precisely control the angle of the deflector to ensure the uniformity of the temperature in the box.
3. The stainless steel dust-free electric heating generator is used, which is clean and does not produce dust. The high-power 3-phase asynchronous high-temperature resistant long-shaft silent motor is used to increase the diameter of the stainless steel turbine fan blades, and the turbine is horizontally corrected to ensure smooth air transport .
4. Automatic oxygen exhaust control system, each supporting imported solenoid valve is automatically switched, which greatly saves nitrogen consumption. It can also be set by itself according to the requirements of the process to meet various process requirements.
5. The oxygen discharge time is less than or equal to 30 minutes. It is equipped with a high temperature resistant oxygen content controller, a zirconia oxygen content sensor, and a set of high temperature resistant self-priming pump, which can detect the oxygen content in real time and display the actual value, and is equipped with an alarm function of oxygen content exceeding the standard.
6. It can be connected to a computer to monitor and control multiple devices at the same time, historical data, historical operation, historical alarm data query, memory operation steps, intelligent and convenient!
7, Strong application functions, aging, annealing, testing, curing, drying, solvent, paint and paint curing, stress relief, etc.
Oxygen content range
Less than or equal to 100PPM
Normal temperature—300 degrees Celsius
±1 degree Celsius
±2 percent (no load)
600720mm 600 (mm)
The heating rate is adjustable, and the no-load room temperature rises to 175 degrees Celsius for about 20 minutes
Water cooling, it takes about 40 minutes to drop from 175 degrees Celsius to 80 degrees Celsius
1, oxygen concentration indicator
2, temperature recorder (paper or paperless)
3, Clean room packaging for transportation and installation
4. Data logging and trend analysis
5, Ethernet, RS485\/232 communication, MES communication
Shenzhen Yihexing has nearly 20 years of baking technology accumulation and experience inheritance, and can provide different degrees of uniformity, size, temperature range; if you have specific requirements or specifications, please contact us according to your needs, so that we can Make sure the equipment is designed, tested and adjusted to meet your requirements.