Nitrogen cabinet

Yihexing energy-saving nitrogen cabinet series adopts advanced intelligent nitrogen-filling control system to control the intake air volume with humidity setting value, which can improve the cleanliness of the cabinet to prevent oxidation of stored items. This model is especially recommended for various fields of industrial production: moisture-proof and oxidation-proof storage such as SMT, IC, LCD, LED package, and electronic products.

▲Specification introduction

▲ Product Features:

Nitrogen control system: Automatic program-controlled induction system is used to automatically control according to the set humidity. When the humidity in the cabinet reaches the set value, the system will automatically cut off the nitrogen supply. When the set value is exceeded, the system will automatically open the nitrogen supply, which is more than the manual charge. Nitrogen gas is more than 50% (depending on the number of doors and turns).

The multi-point jet structure is adopted: nitrogen gas is blown into the tank through more than 30 small holes, so that the nitrogen in the tank is evenly distributed. Anti-oxidation unevenness caused by single-point gas supply is avoided.

Quick dehumidification capacity: It can quickly damp to below 5% RH, and the door can be restored in about 5-10 minutes. It is suitable for frequent door opening and closing occasions.

Flow meter: It can be adjusted according to the flow rate. The inlet pressure is controlled within 0.2~0.4Mpa, and the flow rate is adjustable from 0~25L per minute.

Temperature and Humidity Sensor: It adopts Honeywell temperature and humidity sensor imported from the United States with an error of less than ±3% RH, high precision and high stability.

Temperature and humidity display: Microcomputer large-size digital LED display, synchronous display of temperature and humidity. The temperature is -9 ° C ~ 99 ° C, accuracy ± 1 ° C. Humidity shows 0% to 99% RH with an accuracy of ±3% RH. The display is accurate and stable, and has a long service life. The humidity setting has a memory function and does not need to be reset after power off.

         Load-bearing laminate: The surface of the laminate is punched, the air in the cabinet is accelerated, and the laminate is reinforced. It can withstand a uniform load weight of 50KG/block. The layer height gap can be adjusted freely according to the height of the items placed. Make it easier to store items and use more space.

Seal design: The door seal and rubber strip adopt the built-in airtight installation method, which does not seep out and has excellent sealing performance.

Door window: The door frame window is pressed with 5.0mm high-strength tempered glass. The door handle adopts flat pressure high-strength integrated handle lock.

Humidity range: 1%-50%RH adjustable, select the corresponding dehumidification humidity according to the storage humidity of the item.

▲ Product Advantage Memory Design: The independent intelligent temperature and humidity setting has a memory function, no need to reset after switching on or off.

Quick upgrade: It can be expanded into a physical + nitrogen moisture-proof combination cabinet to enhance the dehumidification effect and can be used as an electronic moisture- proof box without using nitrogen. This saves investment and use costs.

Simple design: The machine can be used only by plugging in the power, and adopts a unique modular design, which is easy to upgrade and maintain. If a certain accessory fails, you can quickly replace the new one, and the newbie will repair it, which is very convenient.

▲ Optional configuration

          Various upgrades are available depending on the usage scenarios and usage.

▲Scope of application

Suitable for all areas of industrial production: SMT, semiconductor, LED packaging, LED applications, LED chips, electronic products, etc.