Vacuum oven for chip semiconductor
Jardine chip semiconductor dedicatedvacuum ovenThe digital technology of analog engineering is used to control the vacuum degree, and the automatic digital display control of the solenoid valve provides more accurate and effective vacuum degree control. There is room for the installation of the vacuum pump, the quick connection flange piping method is adopted, and an independent over-lift preventer is provided. circuit, which not only improves work efficiency but also ensures safety performance. Large-capacity type that can be upgraded according to the applicationvacuum ovenIt is specially designed for drying heat-sensitive, easily decomposable and oxidizing substances, and can be filled with inert gas, especially some items with complex components can also be quickly dried.
1. Easy to operate, fixed value operation, program operation, quick automatic stop operation, automatic stop operation, automatic start operation can be realized.
2. The temperature control is PID touch screen instrument, single-point or program temperature control, automatic calculation, PV\/SV display at the same time, touch setting; with memory function (such as temperature, time)
3. Digital setting can be realized through special function menu keys and up and down keys. Program controller with repeat function, divided into 3 sections and 30 steps.
4. It has safety functions such as self-diagnostic circuit (abnormal temperature sensing, heater disconnection, automatic overheating prevention, SSR short circuit), overheating preventer, leakage protection switch to prevent overcurrent, and key lock.
5. Through the auxiliary menu key, the operation of over-lift preventer, deviation correction and key lock setting can be realized.
6. The vacuum control mode is automatically controlled. When the vacuum degree is reached, the vacuum is stopped. When it is lower than the lower limit, it will automatically start to work in a cycle. After the constant temperature time is completed, it will stop working; manually decompress and fill with air or nitrogen.
Product parametersPRODUCT PARAMETERS
1, Model: YH-DZ-KX-VC
2. Dimensions: width 988mm X depth 980mm X height 1900mm
3, inner tank size: width 600mm X depth 600mm X height 600mm
4. The inner material is: 304 stainless steel industrial plate, thickness 5.0mm, enhanced processing, no deformation after vacuuming;
5. The outer material is: cold-rolled steel plate, thickness 1.2mm, powder paint treatment;
6, the thermal insulation material is: high temperature resistant rock wool, good thermal insulation effect;
7, the sealing material is: high temperature resistant silicone strip;
8. Install movable casters and adjustable fixed feet, which can be pushed arbitrarily;
9. The box structure is one-piece, the upper part is the product box, the lower part is where the vacuum pump is installed, and the right control panel.