Vacuum drying oven

FeaturesPRODUCT FEATURES

1. Technical overview:
Automatic over-rise prevention, over-rise prevention device, self-diagnosis function, power outage compensation function, over-current leakage circuit breaker

Operating temperature range:
40C°～200°C Use vacuum range: -101～0.1 KPa Inner volume of box: 216L

Large-capacity vacuum drying oven that can be upgraded according to the application

Large vacuum drying oven designed for various purposes of vacuum drying. There is space for installing the vacuum pump, the quick-connect flange piping method, and the independent over-lift preventer circuit are provided, which not only improves the work efficiency but also guarantees the safety performance.

Features:

● Easy to operate, fixed value operation, program operation, fast automatic stop operation, automatic stop operation, automatic start operation can be realized

● Digital setting can be achieved through dedicated function menu keys and up and down keys. With repeat function, it is divided into 3 sections and 30 steps program controller.

● Through the auxiliary menu key, the operation of over-rise preventer, deviation correction and key lock setting can be realized.

2. Security:
● With self-diagnostic circuit (temperature sensor abnormality, heater disconnection, automatic over-rise prevention, SSR short-circuit), over-rise preventer, leakage protection switch to prevent over-current, key lock and other safety functions.

Product parameterPRODUCT PARAMETERS

Suitable temperature range: 40～200°C

Adaptable pressure range: 101～0.1kPa

Maximum temperature reaching time: about 60~80 minutes

Temperature adjustment accuracy: ±1°C

Stainless steel plate inside, cold rolled plate outside, surface chemical resistant coating

Thermal insulation material: glass fiber

Heating method: direct heating of the pressure tank wall

Heating power: 8.5KW

Vacuum pump installation room width: 886mm X depth: 810mm X height: 790mm

Control mode: program operation and status, 7-inch LCD touch screen control.

Temperature control method: multi-stage PID

Temperature setting method: use the dedicated operating function menu key and the up and down keys to achieve digital setting

Temperature display method: measured temperature display: green 4-digit LED, digital display

Set temperature display: red 4-digit LED, digital display

Timer: 1 minute to 99 hours and 59 minutes and 100 to 999 hours and 50 minutes (with timer waiting function)

Operation function: fixed value operation, program operation, automatic stop operation, automatic start operation

Program mode: The program runs in 3 segments and 30 steps, which can also be customized according to requirements

Additional functions: deviation correction function, key lock function, power failure compensation function