Shenzhen Yihexing Electromechanical Technology Co., Ltd. is a high-tech enterprise integrating technology research and development, production, sales and service. Yihexing has always adhered to the concept of perfect integration of professionalism and quality, and established a good corporate system. The company has professional industrial moisture-proof drying and dehumidification technology, independently research and development of various specifications of electronic moisture-proof cabinets , nitrogen cabinets , constant temperature and humidity cabinets, ovens and other products, and provide a full range of industrial moisture-proof anti-oxidation drying dehumidification program. The company has many years of experience in the production of ovens, and the following describes the protection work for the oven.
The stainless steel heating tube in the oven is heated after being energized. The high-efficiency centrifugal fan uses air flow to bring the heat in the heating tube to the inside of the studio, and exchanges heat with the baked goods in the working room to achieve the purpose of baking or drying. Because the temperature controller is an electronic product, both the program and the electronic product will fail. At this time, a second layer of protection measures is needed to prevent the temperature from being too high, causing the baking or equipment to catch fire and posing a danger.
The industrial oven of Shenzhen Yihexing Electromechanical Technology Co., Ltd. adopts digital display PID temperature controller, which can accurately control temperature and is easy to operate. With over temperature deviation protection and timing function. The high temperature oven over temperature instrument function is as follows:
1. It adopts imported over-temperature instrument, PID temperature controller, with advanced automatic calculation function and self-correction.
2. The temperature in the main control box does not exceed the SV value of the temperature control table is greater than 5 °C ~ 10 °C. The pointer on the over temperature table is shown. When setting the over-temperature value, it must be 5 °C~10 °C larger than the SV value of the temperature control table, and the heating output will not be disconnected when heating.
3. If the temperature exceeds the over-temperature setting value, the heating contactor will automatically open and no longer warm. At this time, there is no need to adjust, and the temperature will automatically work when the temperature is lower than the over-temperature setting value.
4. If the temperature control table is out of order, the system with its own protection function will run. After setting an over-temperature value, you don't need to adjust it. There is an indication on the over-temperature meter.
5. It will light green when it is not over temperature and red when it is over temperature. For example, when the maximum temperature of the product is 200 °C, the over-temperature protection can be set at 210 °C.