Moisture-proof cabinet refers to the use of various dehumidification technologies to effectively reduce the humidity in the cabinet, so as to achieve the purpose of preventing moisture, mildew, oxidation, rust, and micro-absorption. The moisture-proof cabinet is a sophisticated electronic dehumidification equipment. How to use it correctly is very important. Correct and reasonable operation can make the moisture-proof box equipment perform its functions. The following is a detailed description of several aspects.
1. Pay attention to the humidity level of the moisture-proof cabinet when using the moisture-proof cabinet. Moisture-proof cabinets are generally classified according to humidity levels: 20%-50% medium humidity, 10%-50% low humidity, and ultra-low humidity below 10%. The moisture-proof box will control the humidity in the box to reach and basically stabilize at this set value according to the set humidity value, which can meet the requirements of long-term storage of goods.
2. Pay attention to the position of the moisture-proof cabinet when using the moisture-proof cabinet. The dehumidification host of a moisture-proof cabinet is generally located on the back of the cabinet, with internal moisture absorption ports and external moisture exhaust ports. Therefore, the back of the cabinet should not be directly against the wall, but a distance of 15cm should be allowed. The moisture exhaust port cannot be located. There are wind sources, such as air-conditioning vents, exhaust vents, etc., and do not close to heat sources, or strong magnetic interference sources, so as not to affect the operation of the host. The surrounding environment must ensure a temperature of 5 to 35 degrees, which will affect the life of the electrical components of the dehumidification host. There will be no impact.
3. Pay attention to the placement of internal products and the utilization rate of the volume when using the moisture-proof cabinet. As mentioned earlier, the dehumidification host has an internal moisture absorption port. Therefore, when placing the product inside, do not block this moisture absorption port. You need to allow a distance of 10CM to not affect the efficiency of the dehumidification host. In addition, in order for the humidity in the box to be uniform, the product volume should be less than 2/3 of the cabinet volume, and the items in the box need to be displayed evenly.
4. Pay attention to the nature of the stored items when using the moisture-proof cabinet. Do not put highly hygroscopic, corrosive or toxic chemicals in the box, because products with strong hygroscopicity will affect the humidity collection data of the dehumidifier host and affect the normal operation of the chip program, such as carton, desiccant, Leather, etc., corrosive or toxic chemicals may corrode the temperature and humidity sensors in the cabinet, affect the data collection results, and may cause damage to the sensors. At the same time, toxic gases will follow when the moisture-proof box is dehumidified. Water molecules are discharged into the surrounding environment together, causing pollution and harm.
