Some customers may have such a question, the moisture-proof cabinet dehumidifier core is no problem, why the humidity can't drop down all the time? If you encounter this problem, you must consider whether it is caused by the poor sealing of the moisture-proof cabinet. When we use the refrigerator at home, we will find that the door of the refrigerator will be fitted with a flat sealing strip. The role of the sealing strip is not only to fix the door and the door, but also to have a good sealing effect. The main purpose is to keep the temperature from losing, so every time you take something you must immediately close the cabinet door, just to save the loss of the refrigerator. The same is true for electronic moisture-proof cabinets. The airtightness is one of the main factors that directly affect the dehumidification efficiency and stability of the electronic drying cabinet.
The body of the moisture-proof cabinet must have a good "air tightness" to effectively prevent external humid air from penetrating into the cabinet. However, the normal use of electronic moisture-proof cabinets is that the external humidity is high. In this case, if the cabinet door cannot guarantee the airtightness, the low-humidity air in the cabinet and the high-humidity air outside the cabinet convection, if this convection speed is much greater than the dehumidification of the electronic moisture-proof cabinet Dehumidification speed, then the humidity of the electronic moisture-proof cabinet will be difficult to reach the set value, even if it can reach, the load on the electronic dehumidifier core is also very large.
Shenzhen Yihexing Industrial Moisture-proof Cabinet is made of Baosteel's 1.2mm high-quality steel plate by stamping and bending. The material is cleaned and rust-proofed through multiple procedures before the material is made. The airtight design is resistant to aging. The door seal and rubber strip are built-in. Airtight installation method, no air leakage, to ensure the sealing performance in the box. It adopts original imported sensor, high sensitivity, efficient and stable equipment dehumidification, the set humidity value can be reached within a few hours after power-on, and it can remain stable for a long time.
