With the rapid development of modern industry, many items containing hazardous chemicals need to be heated or dried in industrial ovens.Industrial ovenTherefore, it is used more and more widely, and its various aspects of performance are continuously optimized and improved, such as installing insulation protection, over-temperature protection, leakage protection, overload protection and other measures to improve the safety level. However, as an electric heating device, improper use will cause safety hazards to cause harm to the operator, so what should be paid attention to when using industrial ovens safely?
Different types of products have different heat absorption and heating rate. It is important to master the temperature and time of the baked product when using it. Heat dissipation occurs near the oven door. Be careful of burns. When using high-temperature oven products, power off operation and wear High-temperature gloves to prevent burning fingers when touching heating components. When not in use, turn the oven heating switch, preheating oven air switch, and power switch to the off position to keep the inner cavity wall clean. After baking the product, if there is dirt in the oven cavity, use industrial alcohol Gently wipe the oven cavity wall until it is clean and exhaust moisture from the oven door. Wipe the oven surface with a soft cloth. Do not rinse the cavity with clean water to prevent power connection, let alone wipe with thinner water.
When the oven is working, the operator obtains the temperature value inside the oven through the instrument and the temperature sensor, and operates through the control system. The hot air circulation heating method of the oven has better gas fluidity than ordinary heat dissipation heating methods, which can speed up the drying speed of the materials in the oven. The hot air circulation system of an industrial oven is composed of a blower motor, a wind wheel and an electric heater. The blower motor drives the wind wheel to send out cold air. The cold air is heated by the electric heating device and carries heat energy into the oven's oven studio through the air duct. The hot air circulation system of industrial ovens is beneficial to improve the uniformity of air temperature. During the process of opening and closing the oven door to transport materials, the temperature value will be affected and change. The uniformity of the hot air circulation system is beneficial to resume work in a faster speed The temperature value of the state.
The electrical safety of the equipment can only be guaranteed if the industrial oven is used properly, grounded effectively, and comply with the safety regulations.
